Flat roofs

Flat roofs can be found on buildings of all ages. They can be covered in variety of materials. Seldom flat, they should be laid with a gentle slope (fall) to allow rain to drain to the gutter or drain.

Most flat roofs should not be walked on, especially if there are blisters.  Crawl boards should be used on roofs where there is regular maintenance traffic.

The different roof coverings             

Flat roofs can be made of a number of materials of which lead is the longest lasting. Other metals can be used and you will often find asphalt or bitumen coverings.

134 lead platform roof greyfriars crop lite.jpg
Lead flat roofGreyfriars RoofingFound on mansard roofs, valley gutters, oriels and dormers. Typical length of life is 100 years.


zinc roofing edited.jpg
A zinc roof being laidJohn GilbertFor low pitched roofs. Note the folded upstand joins. Anticipated length of life 50 years.
single membraneDSCF7557 crop lite.jpg
Single membrane roof.John GilbertRubber based - can last 25 - 50 years. Note protective walkways
liquid plastic roof crop lite.jpg
Liquid applied roofJohn Gilbert25 year length of life can be extended by reapplication of the resin. Can be made to look like lead. Good for roofs with lots of protrusions such as vents, pipes and skylights
bitumen flat roof crop lite.jpg
Bitumen Felt Flat RoofJohn GilbertNormally covered in chippings and joins may be seen at the edges. Typical length of life is 10 - 20 years.
asphalt roof edited.jpg
Asphalt Flat RoofJohn GilbertOften used where people walk. Typical length of life is 60 years.

"Cold" and "Warm" roofs

"Cold" roofs have the insulation under the water proof covering whilst "warm" roofs have the insulation above the waterproof layer. Cold roofs need a vapour barrier above the insulation and the space between the vapour barrier and the roof covering needs to be ventilated to prevent condensation.  

"Warm" roofs are less likely to suffer from condensation.

Problems common to all flat roofs

If not laid to a slight fall, ponding can occur.  It's not an urgent problem unless the roof is leaking. Long term however, ponding can lead to problems.  Large or deep ponds add weight to the roof and problems can occur at the edges of the ponding so keep an eye on the situation.

Poor insulation and a lack of vapour barriers or ventilation to the underside of the roof can lead to heavy condensation which is often mistaken for rain penetration. The condensation can lead to rot in the timber structure and corrosion on the underside of lead roofs. Fit appropriate ventilation and insulation.

Before deciding upon a repair, ask a builder to check the condition of the ceiling or roof void below. If the roof is concrete it may be advisable to carry out a core test of the concrete before specifying the final repair.

Wind can damage flat roofs especially those on higher buildings where the edges of the roof or seams are poorly made.  Wind can also move chippings leaving parts of the roof exposed and liable to breakdown by UV light.

"Thermal" and "atmospheric" pumping can occur in metal roofs in some circumstances where the space under the roof is affected by wind or temperature changes. Generally detectable by the noise made, the situation can be resolved by adding additional ventilation. Consult a specialist roofing contractor. 

Replacing your flat roof

There are many factors to consider and a number of alternative materials that can be used.

Consider:

  • how long a guarantee (materials and installation) you want from installers
  • whether you can add more insulation or need to improve ventilation
  • whether you are in a conservation area or listed building
  • how often the roof is walked on.

If you can manage to add more insulation, you may need to raise upstands to cope with the additional depth of the roof.

Whilst choice of materials is very important, any material will last much longer if it is properly laid so get experienced workers on the job.

Professional help recommended?

If the flat roof is covering a large part of your building and needs major repair or replacement, get a professional survey before proceeding.

Who Pays?

Roof repairs are normally a common responsibility.

Further reading

Lead Flat Roofs 

Asphalt Flat Roofs 

Bitumen Felt Roofs 

Single Membrane Roofs

Zinc Roofs  

Metal Tile and Interlocking Metal Roofs

Liquid applied roofing

Further information

Francis March, 'Flat Roofing: A Guide to Good Practice' (3rd edn, RIBA Publications, 1995)

The National Federation of Roofing Contractors 'The Householder's Guide to Flat Roofing'

Liquid Roofing and Waterproofing Association Technical Guidance